Effects of sintering temperature on the microstructure, mechanical, tribological and thermophysical properties of GNPs/IN738 composite

Show simple item record

dc.contributor.author Ogunbiyi, Olugbenga
dc.contributor.author Jamiru, Tamba
dc.contributor.author Sadiku, Rotimi
dc.contributor.author Salifu, Smith
dc.contributor.author Maepa, Charity E.
dc.date.accessioned 2024-03-28T09:30:02Z
dc.date.available 2024-03-28T09:30:02Z
dc.date.issued 2023-03
dc.description.abstract While IN738 Ni-based superalloy is a high strength alloy, it is feasible to improve its properties at the bulk level by reinforcing with graphene nanoplatelets (GNPs), taking advantage of the superior mechanical, tribological and thermal properties using the spark plasma sintering technique. In the present study, the influence of spark plasma sintering temperature range between 900 and 1100 C on the microstructure, mechanical, tribological and thermophysical properties of GNPs/IN738 composite is assessed. The dispersion of GNPs reinforcement and alloying metals to form composite powder is conducted using a turbular mixer and low-frequency planetary ball milling, followed by spark plasma sintering. The relative density of the sintered samples assessed following Archimedes' method indicates increasing densification with the increasing sintering temperature from 94.7% (900 C) to 98.5% (1100 CÞ. The microstructure assessed via SEM, XRD and Raman spectroscopy indicates the formation of precipitate gamma, intermetallic gamma prime, solid solution and GNPs strengthening phases. Thus, the mechanical (micro/nano hardness and Young's modulus), tribological (wear rate and coefficient of friction), and thermophysical (thermal diffusivity, thermal conductivity, and specific heat capacity) properties increased with the increasing sintering temperature. The microhardness increased from 354HV (900 C) to 469HV (1100 C), nanohardness from 8 GPa (900 C) to 17 GPa (900 C), and Young's modulus from 190 GPa (900 C) to 291 GPa (1100 C). The wear rate reduced with an increase in sintering temperature for the three loads of 5, 10 and 20N. The thermophysical properties assessed from 25 to 600 C show the formation of few inflection points as the temperature increases, which is attributed to the dissolution and rearrangement of precipitate gamma prime and Cr in solid solution phases. Similarly, the small increment in the thermal diffusivity is equally associated with the smoother phonon transition at the GNPs/ matrix interface. en_US
dc.description.department Physics en_US
dc.description.librarian am2024 en_US
dc.description.sdg None en_US
dc.description.sponsorship The Faculty of Engineering and the Built Environment, the Tshwane University of Technology and the Department of Mechanical and Mechatronics Engineering of the Tshwane University of Technology, Pretoria, South Africa. en_US
dc.description.uri http://www.elsevier.com/locate/jmrt en_US
dc.identifier.citation Ogunbiyi, O., Jamira, T., Sadiku, R. et al. 2023, 'Effects of sintering temperature on the microstructure, mechanical, tribological and thermophysical properties of GNPs/IN738 composite', Journal of Materials Research and Technology, vol. 23, pp. 5587-5605. https://DOI.org/10.1016/j.jmrt.2023.02.166. en_US
dc.identifier.issn 2214-0697 (print)
dc.identifier.issn 2238-7854 (online)
dc.identifier.other 10.1016/j.jmrt.2023.02.166
dc.identifier.uri http://hdl.handle.net/2263/95413
dc.language.iso en en_US
dc.publisher Elsevier en_US
dc.rights © 2023 The Author(s). This is an open access article under the CC BY-NC-ND license. en_US
dc.subject GNPs/IN738 composite en_US
dc.subject Sintering temperature en_US
dc.subject Microstructure en_US
dc.subject Micro/nano hardness en_US
dc.subject Wear rate en_US
dc.subject Thermophysical en_US
dc.subject Graphene nanoplatelet (GNP) en_US
dc.title Effects of sintering temperature on the microstructure, mechanical, tribological and thermophysical properties of GNPs/IN738 composite en_US
dc.type Article en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record