• Correlations for wall heat flux partitioning during subcooled forced flow film boiling 

  Meduri, Phani K.; Warrier, Gopinath R.; Dhir, Vijay K. (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• Wake analysis of a plunging airfoil 

  Mani, Mahmoud; Goodrzi, Fahime; Karimian, S.M.H. (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• Thermosyphon solar water distiller for remote and arid areas 

  Mohamed, Mousa M.; Abd El-Baky, Mostafa A. (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• A MILP model for energy optimization in multipurpose batch plants using heat storage 

  Majozi, Thokozani; Sandrock, Carl (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• Self-aerated bounded flows in special hydraulic structures. Part 2. A short review on design concepts and sizing procedures of aerators 

  Mutti, M. (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• Self-aerated bounded flows in special hydraulic structures. Part 1. A short review on design concepts and sizing procedures of aerators 

  Mutti, M. (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• Experimental study of heat transfer in a double pipe exchanger using nanofluids: solar application 

  Mare, Thierry; Luciu, Razvan; Sow, Ousmane; Van Vaerenbergh, Stephan (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• Optimal mixing of multiple reacting jets in a gas turbine combustor 

  Meyer, Josua P.; Motsamai, O.S. (Oboetswe Seraga); Snyman, Jan A. (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• Implementation of emerging technologies for NOx reductions 

  Mehta, D. Paul (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• Improving combined cycle power plant performance in arid regions 

  Nirmalakhandan, N.; Gadhamshetty, V.; Mummaneni, A. (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• Approach for the determination of heat transfer coefficients for filling process of pressure vessels with compressed gaseous media 

  Na Ranong, C.; Maus, S.; Hapke, J. (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• Flow field characteristics in the housing of noncircular gear flowmeter 

  Lee, G.S.; Park, M.Y. (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• Experimental analysis and simulation of cavitating throttle flow 

  Morozov, Alexander; Iben, Uwe (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• Optical diagnostics development and coupling dedicated to heat, mass and aerosol transfers in a spray for severe accident safety analysis in nuclear power plant 

  Lemaitre, Pascal; Porcheron, Emmanuel; Nuboer, Amandine (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• Modelling of a thermosiphon effect in a radiator 

  Lahoubi, M.; Pennel, C. (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• Modelling the capture, by pine cones, of wind-dispersed pollen 

  Lahoubi, Mohamed; Pennel, Christophe; Cresswell, James E.; Henning, Kevin; Patrick, Micheal A.; Young, Phillippe G.; Tabor, Gavin R. (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• Wall shear stress in turbulent transient flow 

  Labrage, L.; Zidouh, H. (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• Performance analysis of internally reformed MCFC/IT-SOFC combined cycle 

  Musa, A.; Huisseune, Henk; De Paepe, M. (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• A study of heat transfer enhancement on a tilted rectangular stainless steel plate 

  Nabhan, M.B.W. (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.
• Maximum heat transfer rate density from ducts with wrinkled entrances 

  Bello-Ochende, Tunde; Meyer, Josua P.; Bejan, A. (International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2008)

  Paper presented at the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 30 June - 2 July, 2008.

View more